MSDS Nitro and NiForce products
Material Safety Data Sheet
Nitro™ and NiForce™ PRODUCTS
Note: This MSDS was prepared in accordance with the requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) and is to be used only for this product. The information contained in this MSDS is, to the best of our knowledge, believed to be accurate.
1 – IDENTIFICATION
Manufacturer: Ortho Kinetics Corporation
Address: PMB 16, 1611A South Melrose Dr
City, State, Zip: Vista, CA 92081 USA
Date Prepared: 4 March, 2001
2 – COMPOSITION INFORMATION
This product contains no hazardous components as defined in the OSHA Hazard Communication Standard ( 29 CFR 1910.1200 ).
Polyurethane elastomer, Polystyrene, 304 Stainless Steel, and or NiTi
3 – PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: N/D
Specific Gravity (H20 = 1): N/D
Vapor Pressure (mm Hg): N/D
Vapor Density (AIR = 1): N/D
Freezing/Melting Point: N/D
Solubility in Water: N/D
Appearance and Odor: Clear and colored elastomer and plastic material with no odor
4 – FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/D
Flammable Limits: LEL: N/D UEL: N/D
Extinguishing Media: Chemical foam, CO2 or dry chemical
Special Fire Fighting Procedures: Wear a self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: N/A
5 – REACTIVITY DATA
Stability: Stable if stored as directed.
Conditions to Avoid: Heat, light, aging and contamination
Incompatibility (Material to Avoid): N/A
Hazardous Decomposition Byproducts: Oxides of carbon
Hazardous Polymerization: Will not occur
6 – HEALTH HAZARD DATA
Routes of Entry:
Skin: None known
Eyes: May cause mechanical irritation and damage.
Carcinogenicity – NTP: No
IARC Monographs: No OSHA Regulated Carcinogen: No
7 – EMERGENCY FIRST AID PROCEDURES
8 – PRECAUTIONS FOR SAFE HANDLING & USE
Steps to be taken in case material is released or spilled: N/A
Waste Disposal Method: Dispose of properly in accordance with all federal, state and local regulations.
Precautions to be taken in handling and storing: Store in a cool and dry place away from heat and light.
9 – CONTROL MEASURES
Respiratory Protection: N/A
Local Exhaust: N/A
Mechanical (General): N/A
Protective Gloves: Not required
Eye Protection: Safety glasses recommended.
Work/Hygiene Practices: Handle in accordance with good personal hygiene and safety practices. These practices include avoiding unnecessary exposure to uncured material. Avoid contamination of food.
10 – TRANSPORTATION INFORMATION
Not DOT regulated.
11 – SPECIAL INFORMATION
HMIS (Hazardous Material Identification System) Rating:
H0 F0 R0-Safety glasses
[HMIS Hazard Index: 4 – Severe Hazard; 3 – Serious Hazard;
2 – Moderate Hazard; 1 – Slight Hazard; 0 – Minimum Hazard]
12 – Other Regulatory Information (Not meant to be all-inclusive – selected regulations represented)
NOTICE: The information herein is presented in good faith and believed to be accurate as of the effective date shown above. However, no warranty, express or implied is given. Regulatory requirements are subject to change and may differ from location to another; it is the buyer’s responsibility to ensure that its activities comply with federal, state or provincial, and local laws. The following specific information is made for the purpose of complying with numerous federal, state or provincial, and local laws and regulations. See other sections for health and safety information.
OSHA HAZARD COMMUNICATION STANDARD: This product is not a “Hazardous Chemical” as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200.
This information is being supplied to you under OSHA “Right to Know” regulation 29 CFR 1910.1200 and is offered in good faith as typical values and not as product specification. The information is believed to be true and accurate. No warranty, expressed or implied, regarding the accuracy of this data, the hazard connected with use of the material, or results to be obtained from the use thereof, is made.
Ortho Kinetics Corporation for innovative solutions to headgear compliance with MSDS Nitro and NiForce products.